FOLDING TABLE CLOTH, LAYING TABLE CLOTH AND CHANGING TABLE CLOTH

red : Runner

yellow : Overlay

blue : Table cloth

FOLDING TABLE CLOTH

1. Spread the tablecloth. Make sure that the folding or stitching is on the outside facing the table. * For those of you who are not high enough, you can use a chair so that the table cloth does not touch the floor as a hygiene. *
2. Fold into two parts where the outside must be outside.
3. Take one piece and fold. Similarly to the next.
4. After that, make sure the part is the same as shown in pic.
5.  Lay on the table until after completion of step four. *Make sure the many layers facing towards you *
6.  Take the end of the fabric and fold in until half of the cloth. Repeat as last step and make sure there is a little space in the middle of table cloth. 
7. Completed step six, take both ends of the fabric and fold into as step six.  
8. Make sure the fabric you are in the same situation as step eight.
9. After the fold it to become smaller as the last picture. Then ready! Have a try. ?

LAYING TABLE CLOTH

1. You should prepare a table cloth, which in and neatly folded.
2. Open the folded first layer.
3. Open the folded second layer.
4. Open the folded third layer.
5. Enter each finger in every fold correctly and neatly.
6. Ready and while tuck your little finger.
7. Cradled the first layer starting from the bottom layer.
8. Release slowly each layer.
9. Ready! and adjust a bit to look neatly.

CHANGING TABLE CLOTH

1. Make sure there are no barriers in the table below your position stand.
2. Pull 5 inch cloth from the table.
3. Pull the fabric back up before the end of the cloth that are not opened to show the table and bring the fabric to the middle of last drawn until it appeared in the folded state.
4. Take a new tablecloth and place onto the dirty tablecloth.
5. used a laying table cloth step to spread out a new table cloth.
6. When you lay up in the middle of the table. Pull the dirty tablecloths with the little finger and ring finger grasping a dirty cloth.
7. Pull the new table cloth while pull the dirty table cloth slowly.
8. Pull till the end as shown in the picture.
9. Ready! Now you have changed the table cloth and the dirty table cloth will in a good condition neat folds.

Purpose of table cloth is...

• Make sure the table is in beautiful condition and neat.
• To regularize all the tables in an event.